|
Vision
Microsystems’ TSC695 reference design is a evaluation board (TSC695EVB)
that enables early development.The TSC695EVB offers a solid platform
for both hardware and software engineers to use in evaluating
and prototyping designs that closely parallel their final applications.The
TSC695EVB also provides a live target on which to begin developing
and testing application code.
The
TSC695 includes on chip an Integer Unit (IU), a Floating Point
Unit (FPU), a Memory Controller and a DMA Arbiter. For Real Time
applications, the TSC695 offers a high security Watch Dog, two
Timers, an Interrupt Controller, Parallel and Serial interfaces.
Fault tolerance is supported using specific parity on internal/external
buses and an EDAC on the external data bus. The design is highly
testable with the support an internal and boundary scan through
JTAG interface.
This board is based on the TSC695, a ROM space, a SRAM space,
Several extension connectors and a large range of memory mapping
produces an high flexibility to the evaluation or the demonstration.
Features
TSC695
CPU
Either
one 8-bit boot-flash (up to 512K-byte) or 40-bit boot-flash (up
to 2M-byte)Up to 4M bytes of code using one SIMM module can be
mounted as ROM expansion.
one
bank of 40-bit SRAM for 2 Mbytes of data/code each.Up to 4M bytes
of data/code using one SIMM modules can be mounted as RAM expansion.
2
UARTs
A
8-segment LED is connected to the I/O port, some LEDs are used
to display the status.
External
Interrupt
2
expansion connectors are provided. P1 and P2 are reserved for
system expansion (processor emulation, DMA, exchange RAM, ...).
RTEMS
BSP or VxWorks BSP
JTAG
connection
Benefits
Experienced
support
As
a supplier of reference designs and hardware assisted debugging
tools for ERC32 microprocessor, Vision Microsystems offers knowledgeable,
responsive application and technical support for development projects.
Free
detailed schematics
All
of Vision Microsystems’ reference designs come with free schematics
in electronic format. Schematics give hardware engineers a solid
design for use building their own boards.
Accelerated
early development
Firmware,
hardware, and production test engineers can all take advantage
of Vision Microsystems’ reference designs. Firmware and hardware
engineers can adapt Vision Microsystems’ reference designs to
their own, enabling them to reduce development time. Production
test engineers can use the board and ERC32 MDS debugging tools
to design and prototype complex and efficient production algorithms
before the custom hardware is prototyped.
Emulator
for turnkey development
Vision
Microsystems’ ERC32 MDS emulator is designed to handle the full
lifecycle of an embedded project. ERC32 MDS offer JTAG-pre-configured
hardware diagnostic tests, which are crucial for hardware bring-up
phases. The features and the fast download speed of ERC32 MDS
help shorten software engineers’ projects.
Board
support packages
Because
even the best hardware design is useless without software support,
Vision Microsystems provides the board support packages for RTEMS
and VxWorks. Developers can fully utilize and modify the BSP for
current and future projects.
|
